Tag Archives: Duties

CODE OF PRACTICE FOR SITE SUPERVISION – Responsibilities and Duties under RC’s Stream

Table 4.4 Responsibilities and Duties under RC’s Stream
		Authorized Signatory
Responsibilities	Assuming overall responsibilities in the appointment of his Representative and TCPs.Ensuring the full implementation of the supervision plan regarding his own stream.Ensuring that non-conformities are immediately acted on and that rectification is carried out forthwith.
Duties	Compiling his own part of the supervision plan.Devising checklists of specific tasks for his TCPs.Supervising his Representative and TCPs.Preparing plans, method statement and/or precautionary and protective measures for temporary works categorized as Case 2 and/or Case 3 under paragraph 4.7 of this Code.Notifying the AP of any non-conformities which pose an imminent danger, or cause a material concern for safety.Carrying out site inspections as necessary.
		AS’s Representative
Responsibilities	Accountable to the AS for the implementation of the RC’s supervision plan.Representing the AS as the formal point of contact in communication with other functional streams.Taking up overall responsibilities in carrying out site safety measures and actions in accordance with the supervision plan.Ensuring that the line management, including sub-contractors, are conversant with the supervision plan, and that good coordination and communication exists between his TCPs.
Duties	Directing staff and sub-contractors on safety related matters.Coordinating and compiling reports on supervision activities.Dealing with non-conformities.Assisting the AS in the investigation of the causes of each non-conformity and taking measures to prevent further occurrence.

Table 4.4 Cont’d

		T4/T5
Responsibilities	Accountable to the AS, through the AS’s Representative, for the implementation of the supervision plan.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Checking that assumptions made in the design of temporary works and method statements are validated on site.Checking that actual site conditions and works being carried out agree with the approved plans, design requirements, method statements and precautionary and protective measures.Carrying out specific tasks as per checklist devised by AS.Dealing with non-conformities by making referral to the AS’s Representative and notifying TCPs in other streams.
		T1-T3
Responsibilities	Accountable to the AS through the AS’s Representative.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Checking on routine basis that site works comply with general site safety requirements.Checking specialist aspects of work to see that they comply with the submitted supervision plans. (T2 & T3 only)Checking that the works comply with the approved plans (or submitted plans for minor works), method statements, precautionary and protective measures.Checking that subordinate TCPs have carried out routine checks at the correct frequency and that records are prepared and filed on site. (T2 & T3 only)Carrying out specific tasks as per checklist devised by AS.Dealing with non-conformities by making referral to the AS’s Representative and notifying TCPs in other streams.

Division of responsibility between AP/RSE/RGE and RC for Temporary Works and Working Procedures

The AP/RSE/RGE/RC have the responsibility to ensure the integrity of the temporary structure itself and the associated fixing methods.

The division of responsibility between AP/RSE/RGE and RC for temporary works and working procedures is detailed below:

Case 1 When the prescribed plans stipulate the temporary works, and the sequence of construction or method statements are also shown on prescribed plans, both the AP/RSE/RGE and the RC have their own responsibilities to supervise the carrying out of the works in accordance with the approved/prescribed plans and the Buildings Ordinance and Regulations.

Case 2 When the temporary works, the sequence of construction or method statements are not required to be shown on prescribed plans and have no effect on the permanent structure by way of overstressing or overloading, the RC has the sole responsibility of ensuring the integrity of temporary works and that the carrying out of temporary works should be safe and should not endanger the workers on site, the public and adjoining buildings.

Case 3 When the temporary works, the sequence of construction or method statements are not required to be shown on the prescribed plans but may have effect on the permanent structure by way of overstressing or overloading, the RC shall appoint a person whose qualification and experience are not inferior to a TCP of grade T5 to certify the plans, design information and/or method statement of the temporary works which are to be submitted to the Project RSE/RGE. The person so appointed should also certify the completion of such works. The RSE/RGE may require the RC to submit further calculations to substantiate his design of the temporary works as necessary.

Figure 4.2 illustrates the procedures for dealing with temporary works.

CODE OF PRACTICE FOR SITE SUPERVISION – Responsibilities and Duties under RGE’s Stream

Leave a reply

Table 4.3 Responsibilities and Duties under RGE’s Stream
		Registered Geotechnical Engineer
Responsibilities	Assuming overall responsibilities in the appointment of his Representative and TCPs.Ensuring the full implementation of the supervision plan regarding his own stream.Overseeing the full implementation of the supervision plan regarding the RC’s stream.Giving permission to the RC for carrying out temporary works categorized as Case 3 under paragraph 4.7 of this Code.
Duties	Compiling his own part of the supervision plan.Devising checklists of specific tasks for his TCPs.Supervising his Representative and TCPs.Notifying the AP of any non-conformities which pose an imminent danger, or cause a material concern for safety and the RC fails to rectify.Carrying out site inspections as necessary.
		RGE’s Representative
Responsibilities	Accountable to the RGE for implementing the RGE’s supervision plan.Representing the RGE as the formal point of contact in communication with other functional streams.Taking overall responsibility to check if the safety measures on site meet with the requirements of supervision plans.Accountable to the RGE for the satisfactory execution of the specific tasks, and for the responsibilities of junior TCPs including checking of the essential items for specific tasks provided in this Code.Checking and satisfying that the RC’s safety management structure complies with the supervision plan.
Duties	Assisting the RGE in carrying out safety management functions.Coordinating and compiling reports on supervision activities including reports on non-conformity.Dealing with non-conformities.

Table 4.3 Cont’d

		T5
Responsibilities	Accountable to the RGE through the RGE’s Representative, for the implementation of the supervision plan.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the RGE.Dealing with non-conformities by making referral to the RGE’s Representative and notifying TCPs in other streams.Checking that site works comply with the approved plan, design requirements including those of the method statements, precautionary and protective measures.Validating conditions on site which relate to design assumptions for temporary or permanent structures.
		T2/T3
Responsibilities	Accountable to the RGE through the RGE’s Representative.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the RGE.Checking that the works comply with the approved plans (or submitted plans for minor works), method statements, precautionary and protective measures.Monitoring the work of the RC’s TCPs.Dealing with non-conformities by making referral to the RGE’s Representative and notifying TCPs in other streams.

CODE OF PRACTICE FOR SITE SUPERVISION – Responsibilities and Duties under AP’s Stream

Leave a reply

Table 4.1 Responsibilities and Duties under AP’s Stream
		Authorized Person
Responsibilities	Assuming overall responsibilities in the appointment of his Representative and TCPs.Ensuring the full implementation of the supervision plan regarding his own stream.Overseeing the full implementation of the supervision plan regarding the RC’s stream.Establishing an efficient and effective mechanism for dealing with non-conformities.
Duties	Assessing the scale for each type of works relevant to the project.Compiling his own part of the supervision plan.Coordinating and submitting the supervision plan to the BA.Devising checklists of specific tasks for his TCPs.Supervising his Representative and TCPs.Notifying the BA of any non-conformities which pose an imminent danger, or cause a material concern for safety and the RC fails to rectify.Carrying out site inspections as necessary.
		AP’s Representative
Responsibilities	Accountable to the AP for the implementation of the AP’s supervision plan.Representing the AP as the formal point of contact in communication with other functional streams.Taking overall responsibility to check on site if the safety measures required under supervision plans are implemented.Accountable to the AP for the satisfactory execution of the specific tasks, and for the responsibilities of junior TCPs including checking of the essential items for specific tasks provided in this Code.Ensuring that the RC’s safety management structure complies with the supervision plan.

Table 4.1 Cont’d

Duties	Assisting the AP in carrying out safety management functions.Coordinating and compiling reports on supervision activities including reports on non-conformity.Dealing with non-conformities.
		T4
Responsibilities	Accountable to the AP, through the AP’s Representative, for the implementation of the supervision plan.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the AP.Checking that specified aspects of works comply with approved plans, design requirements and method statements, precautionary and protective measures are in place and followed.Dealing with non-conformities by making referral to the AP’s Representative and notifying TCPs in other streams.
		T3
Responsibilities	Accountable to the AP through the AP’s Representative.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the AP.Checking that the works comply with the approved plans (or submitted plans for minor works), method statements, precautionary and protective measures.Monitoring the work of the RC’s TCPs.Maintaining on site registers of all relevant site supervision plans together with all reports, documents and correspondence relating to the supervision plan.Dealing with non-conformities by making referral to the AP’s Representative and notifying TCPs in other streams.

Table 4.2 Responsibilities and Duties under RSE’s Stream
		Registered Structural Engineer
Responsibilities	Assuming overall responsibilities in the appointment of his Representative and TCPs.Ensuring the full implementation of the supervision plan regarding his own stream.Overseeing the full implementation of the supervision plan regarding the RC’s stream.Giving permission to the RC for carrying out temporary works categorized as Case 3 under paragraph 4.7 of this Code.
Duties	Compiling his own part of the supervision plan.Devising checklists of specific tasks for his TCPs.Supervising his Representative and TCPs.Notifying the AP of any non-conformities which pose an imminent danger, or cause a material concern for safety and the RC fails to rectify.Carrying out site inspections as necessary.
		RSE’s Representative
Responsibilities	Accountable to the RSE for implementing the RSE’s supervision plan.Representing the RSE as the formal point of contact in communication with other functional streams.Taking overall responsibility to check if the safety measures on site meet with the requirements of supervision plans.Accountable to the RSE for the satisfactory execution of the specific tasks, and for the responsibilities of junior TCPs including checking of the essential items for specific tasks provided in this Code.Checking and satisfying that the RC’s safety management structure complies with the supervision plan.
Duties	Assisting the RSE in carrying out safety management functions.Coordinating and compiling reports on supervision activities including reports on non-conformity.Dealing with non-conformities.

Table 4.2 Cont’d

		T5
Responsibilities	Accountable to the RSE through the RSE’s Representative, for the implementation of the supervision plan.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the RSE.Dealing with non-conformities by making referral to the RSE’s Representative and notifying TCPs in other streams.Checking that site works comply with the approved plans, design requirements including those of the method statements, precautionary and protective measures.Validating conditions on site which relate to design assumptions for temporary or permanent structures.
		T3
Responsibilities	Accountable to the RSE through the RSE’s Representative.Taking up relevant responsibilities as set down in the Technical Memorandum and this Code.
Duties	Carrying out specific tasks as per checklist devised by the RSE.Checking that the works comply with the approved plans (or submitted plans for minor works), method statements, precautionary and protective measures.Monitoring the work of the RC’s TCPs.Dealing with non-conformities by making referral to the RSE’s Representative and notifying TCPs in other streams.